|
Specifications
• 100 Watt Average Power (RMS)
• 20 kHz Output Frequency
• 200 Watts (peak power) in Water
• Timer ( .1-99 minutes)
• Variable Power Level Control
• Hi / low power Selector
• Analog Power readout
• 30 Minute System Duty Cycle
• 120/230/240 Volts 50/60 Hz AC
Applications
• Lysis of Cells
• General Biological Disruptions and Dispersions
• Emulsification and Homogenization of Immiscible Liquids
• Dispersion and Deagglomeration of Particles
• Pharmaceutical Solubilization and Suspension
• Degassing of Solvents and Samples
Features
• Repeatable Performance
• Full Power at Atmospheric Pressure
• Easy to set digital timer
• Easy to read digital timer
|
|
|
5T Standard Probe the unit is supplied with the
standard titanium probe. 108 mm long, 19 mm (3/4"). There
are other probes for special applications.
40TL Needle Probe Resembles the standard probe,
length 127 mm, 4 mm, (5/32"), titanium. With this probe very
small volumes can be treated at extremely high energy levels.
12TL Intermediate Probe Resembles the standard probe,
length 123 mm, 95.mm, (3/8"), titanium. With this probe bottles
and other vessels with smaller openings can be treated at extremely
high energy levels.
50T Catenoidal Probe Due to its shape, this probe produces
a wider area of cavitation than the standard probe. This is useful
for dispersing and emulsifying.
30T 50 ml Cup Probe This probe consists of a solid
titanium cylinder with a 50 ml cylindrical cavity machined into
the end. The specimen is placed directly into this cavity or 1½
ml micro centrifuge tubes are put in the water with the wetting
agent in the cup tip for cell disruption. The cup tip can also
be used for aerosol production and studying low level ultrasound
effects on microorganisms.
Cooling Jackets The use of a cooling jacket is recommended
whenever the unit is operated either continuously or intermittingly
for prolonged periods of time or when heat build up in the fluid
must be avoided. The cooling jacket is slipped over the probe
and a coolant flowing through the jacket cools the probe and the
transducer.
7T Small Cooling Jacket For use with 5T, standard probe.
10T Large Cooling Jacket For use with the 50 ml
cut tip.
|
|
